美国3M-CUNO不锈钢过滤器（滤筒）采用SS304或SS316为外壳，可配用PP棉、尼龙、熔喷等不同材质作为滤芯，有效去除水中的微小悬浮物，细菌及其它杂质等，使原水水质达到反渗透膜的进水要求。

SL-KR model cartridge filter housing is designed to conform to ASME code SECTION VILL,Div.1 standards. The housings are available as certifiled ASME U-stamp housing or as a non- code housing. The ASME code design ensures the customer that all material and fabrication procedures meet the most stringent requirements,while providing safety to operating personnel.

The SL-KR model comes in a wide range of sizes with flow capacities raging from 60 to 4500 gallons per minute (GPM) and are designed to accommodate from 3 to 23 rounds of cartridges.

The standard housings are offered with 150 psi designs and can be easily configured fro specific system requirements.

DC Model filter housings, constructed of durable 304L stainless steel, meet general-purpose industrial and commercial filtration needs. All wetted welded surfaces are stainless steel.External surfaces of the DC filter housings are blasted for a consistent, easy care finish.Pickle and passivation are also available as an

option.The DC Model Cartridge Filter Housing is available in a variety of sizes to accommodate from 4 to 88 filter cartridges with lengths to 40 inches. The DC Model Housing handles liquids at pressures and temperatures of up to 150 psig at 250°F

he CT101,102,and 103 Series Cartridge Filter Housings can use one, two, or three 9 3/4〞equivalent single-length filter cartridges, respectively. The CT102 and 103 Series can also use one 19 1/2" and one 29 1/4" filter cartridge respectively.